Design of New Combined VENTURI and Hydrodynamic Analysis
Abstract
In this paper, aiming at the improvement of VENTURI tube, a combined VENTURI tube is proposed. Using SOILDWORKS for three-dimensional modeling and WORKBENTH for fluid dynamics simulation, the simulation data under different combinations of angles were obtained and the following conclusions were obtained: Under the premise of considering the impact loss, The higher the speed, the greater the negative pressure value. The losses of 45°, 60 °, 135 °,150 ° are respectively 0.059%, 0.064%, 0.12%,0.27%.
Keywords
Hydrodynamics, Simulation, Fluent, VENTURI.
DOI
10.12783/dtetr/ecame2017/18414
10.12783/dtetr/ecame2017/18414
Refbacks
- There are currently no refbacks.